Headland Management V3.0

Headland Management mod for compatible with FS25 version V1.6.

Headland management for tractors, field sprayers, mowers and harvesters.

Headland management allows functions to be combined in the vehicle and activated together at the touch of a button to simplify turning manoeuvres during field work. All functions can be activated and deactivated individually for each vehicle via a GUI in order to achieve ideal adaptation to the work being carried out.

Headland management must be added to the respective vehicle as a one-off configuration in the shop or in the workshop before use. The cost for this is 3000$. It can be activated and deactivated in the vehicle. Various buttons can also be configured for activation and deactivation.

Functions included:
Reduce speed (cruise control) and raise again, reactivate cruise control if it was previously active
Raise lowered implements and lower them again, optionally raise front implements before raising rear implements
Turn the plough, single-stage or two-stage (via the centre position)
Raise and change track markers
Change sides with crab steering activated
Switch off PTO shaft(s) and hydraulics and switch on again
Warning tone when headland mode is activated
On/off switch: The headland management can be switched on and off. This prevents accidental activation during transfer to the work site and improves road safety.
Automatic headland management: Automatic activation of headland mode when the headland is reached. Optional return to field mode after completing the 180° turn.
Option to temporarily deactivate headland automatic headland by pressing a button
Contour guidance: Automatic control along the field boundary or along the cultivated area
The configuration is saved and restored for each device type

With existing EnhancedVehicle (FS25_EnhancedVehicle):
Deactivate and reactivate GPS lane guidance, optionally trigger the turning function
Release and reset active differential locks
Use of EV headland detection if it has been activated

Pre-assigned key combinations (can be changed):
Switch headland management on/off: (left) Shift + (left) Alt + X
Switch operating mode (field mode / headland mode): (left) Shift + X
Call up GUI for configuration: (left) Shift + (left) Ctrl + X

Other prepared key combinations (not pre-assigned)
Temporarily deactivating/reactivating (toggling) the headland automatic function
Temporarily deactivating the automatic headland automatic function
Reactivating the automatic automatic
Activation of the field mode
Activation of the headland mode